Acer E1-572G windows 7 installation, Convert windows 8 to windows 7

Acer E1-572G windows 7 installation, Convert windows 8 to windows 7

Hello You have Acer E1-572G installed on your computer to convert windows 8 to windows 7 you will do the following:

First, turn off your computer and restart it, do not start, press F2 and enter BIOS setup.

After entering the bios, we come to the Boot Mode section of the Boot Menu and select the Legacy option there. Then we say save it on the exit menu.

You will also be able to boot from the Boot menu by selecting Boot Priority Order from the Boot menu. You can also use the F6 and F5 options to select the Cd Rom or USB memory option, and then save and exit from the exit menu.

Important Notes: Setup Usb Memory etc. If you are going to do so, insert the memory into the USB ports before entering bios. Or you can not see your memory in Bios.

First place all your backups in a different position. It’s a little hard to just format the c part, so you’ll have to format all the hdd partitions so that you can create them again.

Delete all of the hdd partitions at the time of installation and recreate them. Otherwise you will get the Windows Can not Install Diskette error.

Leave a Reply

Your email address will not be published. Required fields are marked *